Painting wood may seem simple: sand a coat, brush in and get to work. But those who start without degreasing almost always run into problems. This is because wood attracts grease, dirt and deposits from its surroundings - more than you see at first glance. From skin grease on banisters and doors to cooking fumes in the kitchen and old wax on furniture: if you paint directly over them, the paint adheres poorly and often flakes within a short time. Therefore, wood degreasing is an indispensable first step for beautiful, tight and durable paintwork.
Why degrease wood?
Wood is a natural product with an open structure. As a result, grease and dirt easily migrate into the grain. If you paint over this, problems such as:
- poor adhesion of primer and lacquer
- uneven gloss or dull spots
- blisters or spots under the paint
- faster peeling off, especially in heavily used areas
In short: no matter how well you sand or how expensive the paint is, without degreasing, the paint layer will never adhere optimally.
How do you degrease wood?
Proper degreasing is the first and most important step before painting or varnishing wood. Wood quickly absorbs grease, skin oils, cooking fumes and dirt. If you do not remove these, paint adheres poorly and the paint layer may later flake.
At SuperCleaners, you can choose from two professional products. For outdoor wood such as garden furniture, fences or hardwood, there is the Super Wood & Teak Cleaner, which removes not only grease but also green deposits and deeply ingrained dirt. For doors, window frames and furniture indoors, use Super Paint Degreaser & Cleaner. This product makes the wood completely grease-free and ensures a clean, matt surface to which paint adheres optimally.
Degreasing is simple: apply the product diluted with a sponge or cloth, rub along with the wood grain and rinse with clean water. Let the wood dry thoroughly before you continue sanding or painting.
By not skipping this step, you prevent adhesion problems and ensure a tight, durable end result. So degreasing always remains step one in every paint job.
SUPER Wood & Teak Cleaner
- Extends life of wooden surfaces
- Suitable for all types of wood
- Ready to use
- Soak the surface to be cleaned with clean water
- Then apply the product to the surface to be cleaned
- Let the product soak in (do not dry in) then brush thoroughly and firmly
- Rinse with plenty of water and then let dry
- In case of heavier soiling, repeat the treatment
SUPER Paint Degreaser & Cleaner
- Suitable for all substrates
- Highly concentrated
- Ensures better paint results
- Mix about 50ml of the product with a bucket of water (warm water increases the degreasing effect of the product).
No need to dilute it with water - Clean and degrease the substrate with a sponge or cloth
- With light soiling and light use of the paint degreaser, the substrate is directly paintable
- For heavier soiling, first wipe off the paint degreaser with a damp cloth
- Be a Picasso and start painting
Common mistakes when greasing wood
When degreasing wood, two common mistakes often go wrong. The first is sanding alone. Sanding removes dirt, but not grease. In fact, if a layer of grease is still present, you actually sand it deeper into the wood pores, causing poor paint adhesion later. A second mistake is working too wet. Wood is sensitive to moisture and absorbs water quickly. This can cause it to warp, start to work or cause problems with paint adhesion later. Therefore, never use too much water and always allow the surface to dry completely before continuing.
Extra tip for outdoor wood and garden furniture
With outdoor wood - such as garden benches, tables, decking or fences - comes not only grease, but also green deposits, algae and weather pollution. The Super Wood & Teak Cleaner is the best choice for this. This product deeply cleans, removes deposits and leaves the wood clean and fresh, so you can continue treating it effortlessly.
After degreasing: preparing wood for painting
Once the wood is completely grease-free, you can start the preparatory steps for a smooth final finish. First, lightly sand the surface to make it nice and even and create optimal adhesion. Then repair any cracks or minor damage with wood filler. Finally, apply a suitable primer. This not only ensures better coverage, but also extends the life of the paint layer.
Order now!
Do you want to degrease wood quickly and effectively before painting or varnishing? With the Super Paint Degreaser & Cleaner you make doors, window frames and furniture completely free of grease again, so that paint adheres optimally and dries beautifully. If you work with hardwood or outdoor furniture, the Super Wood & Teak Cleaner is the ideal choice to remove deep-in dirt, deposits and grease. With these two products, you have everything you need to perfectly clean any surface and give your paintwork a durable, professional basis.