SUPER IMPREGNATING AGENT 5L

10-year water-repellent facades

Super Impregnating Agent repels both dirt and water. Super Impregnating Agent is a water-based professional impregnating agent. The product is suitable for impregnating both existing and new porous substrates, such as baked stone, concrete, sand-lime brick, plaster, natural stone, roof tiles and various other moisture-absorbing substrates. The product is highly suitable for the prevention of moisture problems, frost damage, corrosion, general soiling, growth of mould, moss and algae. The product guarantee is approximately 10 years.

HÉ VAKMAN!

NEED INFORMATION?

A good way to armour your house against moisture is to impregnate the facade. This involves making the material water-repellent and mould-resistant. But these are not the only benefits of impregnation. The impregnating agent also works, for example; dirt repellent, fire retardant, (sea) water resistant and graffiti repellent. Super Impregnating Agent is suitable for impregnating both existing and new porous substrates.

Here are the advantages of an impregnated facade:
- No moisture in the house
- Insulating effect
- Dirt, algae and graffiti are easy to remove

With one jerry can you can impregnate about 10m2.

So do you want to repel moisture and dirt, among other things? Then of course you should use Super Impregnate! Are you planning to use the product for roof tiles? Then we recommend you first clean/degrease the roof tiles and test the impregnating agent on one tile first.

AND NOW YOU!

GAS ON THAT JOB

For a lasting waterproof result, take the following 6 steps:

1. Remove sand, clay and other loose particles from the substrate

2. Before treatment, clean (degrease) the substrate with Super Degreaser or Super Industrial Cleaner

3. Assess the substrate for present moisture. Allow to dry thoroughly before impregnating

4. Take precautionary measures to avoid splashing on plastics, paving and glass

5. In case of any splashes, clean immediately with Super Degreaser or Super Industrial Cleaner

6. Apply the product to the substrate using a flow or spray method at a temperature of at least 8 °C and dry weather. The impregnating agent must be well absorbed with a minimum consumption of 0.5 litres per square metre. If this differs, a second treatment should be carried out at all times.